澳门棋牌网址大全 - 澳门游戏网址大全

澳门棋牌网址大全 - 澳门游戏网址大全

当电力短缺时,会触发警报,通知看护者. Apex的一些床垫都配有运输帽,在停电的情况下,床垫内的空气可以在短时间内支撑患者.

当电力短缺时,会触发警报,通知看护者. Apex的一些床垫都配有运输帽,在停电的情况下,床垫内的空气可以在短时间内支撑患者. Also, if the system has a cell-on-cell design, 细胞的底部会根据病人的体重保持数小时的充气状态.

气垫充气时间取决于压缩机的流量和气垫的尺寸. In general, bubble pad will take about 20 mins, 4”/5”覆盖床垫需要25~35分钟,8”更换床垫需要30~40分钟. to inflate. The blower based system (such as Serene) can be inflated within 2 minutes.

After inflating the product, place the patient on the product, and then perform a hand check* (explained in next question).
In fact, Apex一直为我们的客户着想,减轻了客户在这个问题上的压力. From Domus 3 to Domus Auto, a complete set of Pro-care, and Serene, during the inflation period, 系统将被显示为“Maxfirm”或Domus 3和Pro-care 2上显示为“Low pressure”. However, once when the mattress is properly inflated, 系统将自动进入交替模式(Serene为静态模式),这样护工就可以确保系统充气正确.

First make sure the CPR plugs are secure and in place. 再检查气泵与气垫之间的气管连接是否紧固.

Normal mattress cover may be used on all mattresses.
Apex床垫全部通过ISO-10993生物相容性测试(致敏性和皮肤刺激细胞毒性).
Also, all the covers have passed the flammability test of Cal TB116/117. They are designed for low friction, water proof and vapor permeable; hence, should be easier to use and better for pressure prevention.

床垫的目的是重新分配来自病人的压力,也防止病人从底部出来.
The higher cell allows the system to provide lower pressure range. On the other side, 较低的细胞系统需要支持更大的压力,以防止病人触底, that is why overlay systems need higher pressure.

Alternating mattress is designed for Pressure Relief. It’ll periodically remove the pressure to allow reperfusion of the capillary bed. 压力减轻可以使血流恢复正常,并重新灌注因施加压力而缺乏血液的组织. By changing position we naturally allow this to happen. 减压床垫通过在一段时间内循环充气和放气来积极地促进组织灌注, 所以身体任何一个接触表面的部位的压力都会有规律地变化.

真正的低空气损失床垫是一个静压系统设计的压力降低. 通过增加患者表面面积,降低皮肤/床垫界面的接触压力来实现减压.

每个系统都有它的优点,所以它真的取决于治疗师或患者的偏好.

If your mattress system is with interchangeable air cells, each air cell can be taken out individually and replaced with a new one if needed.

Apex provides a wide range of products for patient's different needs. Choosing a right mattress system depends on the treatment level of pressure ulcer, the weight of patient, purpose of treatment (prevention or pain management?) and price.

It mainly depends on the environment the system is operating. Normally, check the filter every 3 months will be a good maintenance exercise.

数字系统具有微处理器,因此系统可以设计额外的功能,由计算机控制, such as Cycle Time, Seat Inflation, Panel Lock, etc. 此外,通过编程软件,压力水平可以一致和清晰地定义.

In analogue system, the functions are operated based on mechanism design. The pressure level indicated on regulator knob is not linear. Therefore, the benefit is limited compared to digital system.

您可以根据泵上显示的重量参考先简单地调整设置, and then ask the patient (if possible) for comfort degree. 进一步进行手检查,将手掌向上,在身体最重的部位感受气垫. 在身体的压力点和你的手之间应该有至少1英寸的支撑点. 如果出现触底反弹的情况,只需将压力调高一点.

Usually it means there is a problem on the motor assembly. 请联系您的当地经销商或艾派克医疗客户服务,以了解更多信息.

It indicates there is an insufficient pressure in the system. 请检查油管是否与泵连接紧密,CPR阀是否关闭正确. Also check if any breakage on the air cells.

After inspecting all check-points and low pressure alarm remained, 请联系您的当地经销商或艾派克医疗客户服务,以了解更多信息.

According to EPUAP guideline, 对于体重为70kg且BMI正常的个体,在胸腔附着放气的正常点,断开气垫上的气管,在15秒内实现心肺复苏的快速放气.

Maybe there is a low-pressure situation, 检查气泵与气垫之间的空气软管连接是否紧固, CPR阀门是密封的,气箱或气软管接头是否有泄漏.

This will depend on the kind of system you're using. Some system are alternating therapy products. That means air alternates between each air outlet; therefore, wait for the complete cycle of the alternating phase. Other system are low-air-loss (static) therapy products, 出风口应有稳定的气流流出,除非系统达到其预设的压力水平或请检查是否有扭结的空气软管.

In most of Apex's products, 有一个快速接头的运输帽,这样床垫可以在一段时间内保持空气在里面(Domus 3, 4, Auto and complete Pro-care series)

For a standard single cell with micro low-air-loss mattress, it’ll last for approx. 10~30mins, depending on patient weight. 根据病人的体重,这种牢房间床垫可以保持空气10小时左右.

For pump, wipe with a damp cloth and a mild detergent and keep it away from dust.
For mattress, 用温和的洗衣粉擦拭空气室和底盖,使设备风干.
Top cover may follow below direction:

Silver+ Stretch & Stretch
Silver+ Nylon/PU & Nylon/PU

我们确信,使用Apex的任何治疗支持表面系统时,没有与乳胶皮肤接触或吸入过敏反应相关的风险. 产品在整个生产过程中不接触任何乳胶产品.

Global - English

Cookies

我们使用cookies来优化本网站,并根据您的需要不断更新.请按“Cookies”以获取有关本网站使用Cookies的详细资料. If you click "Yes, I agree", cookies will be activated. If you do not want cookies to be activated, you can opt out here. The settings can be changed at any time under "Cookies".

Yes, I agree.